09-06-2022, 09:25 AM
|
#8
|
Drives: 2012 Chevrolet Camaro l99
Join Date: Aug 2020
Location: Austin, TX
Posts: 2,233
|
Quote:
Originally Posted by Joe.G
Is our stock stuff 3/8?
|
Yes except for the evap purge line to the purge solenoid, it is 5/16. I know for sure that the quick disconnect side of the fitting is 5/16 but I can't remember if I used a 3/8 fuel hose to connect it to the purge solenoid or not and it needs to have that 45* angle on it for it to allow it to lean over towards the solenoid.
https://www.holley.com/products/plum...ts/AT991986ERL
__________________
DSS Pistons, Eagle ESP L19 Rods, ARP Head and Main Studs, TSP PRC CNC Ported Heads milled .030, Cometic .040 Head Gaskets, GPI SS3 VVT Camshaft, GM Racing Lifters, CHE Trunnions, Melling 10355HV Oil Pump, Cold Air Inductions CAI, Fast LSXR Intake Manifold, Nick Williams 103 TB, TSP Longtubes, ZL1 Fuel Pump, Mishimoto Radiator and Oil Cooler, 3600 Circle D Converter, Tru Cool 40k Tranny Cooler, Fluid Dynamics Balancer, EBC 3GD Rotors with EBC Bluestuff NDX Pads, Bilstein B6 Shocks / Struts with Eibach ZL1 Drop Springs
Build Thread https://www.camaro5.com/forums/showthread.php?t=609817 |
|
|