|
Yep it fits the characteristics I want but I do have to admit I thought it would be a little more aggressive than that.
I was hoping for something like 218 230 118 with a similar lift or maybe 218 226 116 but there really aren't any factory off the shelf VVT cams that will do what I want. The only factory cam off the shelf that might work is the TSP VVT1 L92 cam 216 229 114 but that is a little more overlap then I want. Looking for something in the -10.5-12 overlap area with a 116-118 lobe separation is my guess from all the cams I have seen.
I could easily go with something like the tsp 2.2 or gpi ss2 vvt with my stall but that doesn't really provide the characteristics I am looking for. The cam company that spec. the cam said I would be leaving about 35rwhp on the table over their stage 2 vvt cam but it would lope hard for a daily.
|