Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

morepowerjoe · 12-12-2022, 07:08 PM

Just a quick update. I got it currently shifting at about 6700 rpm and the engine seems to like it. I'll have to wait until I get to the track to fully test it out but it's a blast to drive. I did have an annoying little problem. When I would come to a stop with each downshift the rpm's would drop real low and I thought it was an airflow issue but what it turned out to be was I have torque reduction disabled so, without all the timing pull from T/R I had to also disable the closed throttle down shifts to get it to stop dipping down in rpm. And presto it is now fixed. I think my tuning is almost complete but the next challenge will be getting traction control working correctly. lol

12-12-2022, 07:08 PM	#65
morepowerjoe Drives: 2012 Chevrolet Camaro l99 Join Date: Aug 2020 Location: Austin, TX Posts: 2,232	Just a quick update. I got it currently shifting at about 6700 rpm and the engine seems to like it. I'll have to wait until I get to the track to fully test it out but it's a blast to drive. I did have an annoying little problem. When I would come to a stop with each downshift the rpm's would drop real low and I thought it was an airflow issue but what it turned out to be was I have torque reduction disabled so, without all the timing pull from T/R I had to also disable the closed throttle down shifts to get it to stop dipping down in rpm. And presto it is now fixed. I think my tuning is almost complete but the next challenge will be getting traction control working correctly. lol __________________ DSS Pistons, Eagle ESP L19 Rods, ARP Head and Main Studs, TSP PRC CNC Ported Heads milled .030, Cometic .040 Head Gaskets, GPI SS3 VVT Camshaft, GM Racing Lifters, CHE Trunnions, Melling 10355HV Oil Pump, Cold Air Inductions CAI, Fast LSXR Intake Manifold, Nick Williams 103 TB, TSP Longtubes, ZL1 Fuel Pump, Mishimoto Radiator and Oil Cooler, 3600 Circle D Converter, Tru Cool 40k Tranny Cooler, Fluid Dynamics Balancer, EBC 3GD Rotors with EBC Bluestuff NDX Pads, Bilstein B6 Shocks / Struts with Eibach ZL1 Drop Springs Build Thread https://www.camaro5.com/forums/showthread.php?t=609817