12-24-2022, 06:50 AM
|
#2
|
Drives: 2012 Chevrolet Camaro l99
Join Date: Aug 2020
Location: Austin, TX
Posts: 2,232
|
I have had all the torque reduction stuff on my transmission turned off for 2 years and for 20k miles with 171k miles on the tranny and just recently installed a triple d 3600 converter with no problems so far. I also have what they say is too much pressure in the transmission which I know GPI runs around the same pressures I do because they tuned my car in 2020. So I don't think that disabling the torque reduction will hurt your transmission. What I would be careful is where your tanny lock up the converter. I have mine set to only 6th gear and at 55 mph and release at 50 mph.
__________________
DSS Pistons, Eagle ESP L19 Rods, ARP Head and Main Studs, TSP PRC CNC Ported Heads milled .030, Cometic .040 Head Gaskets, GPI SS3 VVT Camshaft, GM Racing Lifters, CHE Trunnions, Melling 10355HV Oil Pump, Cold Air Inductions CAI, Fast LSXR Intake Manifold, Nick Williams 103 TB, TSP Longtubes, ZL1 Fuel Pump, Mishimoto Radiator and Oil Cooler, 3600 Circle D Converter, Tru Cool 40k Tranny Cooler, Fluid Dynamics Balancer, EBC 3GD Rotors with EBC Bluestuff NDX Pads, Bilstein B6 Shocks / Struts with Eibach ZL1 Drop Springs
Build Thread https://www.camaro5.com/forums/showthread.php?t=609817 |
|
|