Quote:
Originally Posted by gtstorey
Looking at the pictures that show up from that part number, it looks like something a good hydraulic hose shop could make up or maybe even just replace the rubber portions.
You might also be able to adapt the ends of the metal lines to take a compression fitting to AN line adaptor and replace the rubber portion with braided lines. I adopted the stock transmission cooler lines this way. Depends on the diameter of the steel lines.
Beyond that, salvage yard for a used one. This part number shows as being used on the earlier model hydraulic steering V8 so shouldn't be to hard to find used.
|
ok thanks. we called all local salvage yards without luck, I'll have to expand our search there. I'll have to look into a hydraulic shop and see if I can find someone that can fabricate one.