[Vaddy]

Heres a summary of how much and everything that I got to make this project possible.

Turbo Kit($3,773)[Intercooler,BOV,Wastegate,Vacuum Reference, Heat Shielding]: https://huronspeed.com/product/cam5t4/
MAF Extension($50): https://www.bmotorsports.com/shop/pr...oducts_id/3432
Drill and Tap($11): https://www.amazon.com/dp/B01MG92FX1...t_details&th=1
Grease($18): https://www.amazon.com/dp/B09NL7V11R...roduct_details
10-AN 90 Degree($13): https://www.amazon.com/dp/B0752LBRVV...t_details&th=1
4-AN 90 Degree($10): https://www.jegs.com/i/JEGS+Performa...10891/10002/-1
1/4 Drill(~$40) + Battery
Step Drill($14): https://www.harborfreight.com/power-...lls-91616.html
Oil Passage Block($200): https://www.keislerautomation.com/un...-passage-block
Oil Filter($4): https://www.walmart.com/ip/ACDelco-P...943239&veh=sem
Overflow Tank($20): https://shop.advanceautoparts.com/p/...3-001/17191312
CatchCan Setup($384)
Vacuum Pump($120): https://www.amazon.com/dp/B00SZ4QFW0...roduct_details
Intake Coupler(~$20)
Power Steering Pulley($20): https://www.autozone.com/suspension-...7360&gclsrc=ds
Power Steering(~$100): https://www.rockauto.com/en/catalog/...ring+pump,7380
Pulley Installer/Remover($35): https://www.autozone.com/test-scan-a...ce=c&gclsrc=ds
Mineral Spirits($9): https://www.homedepot.com/p/Klean-St...5379&gclsrc=ds
O2 Extenders(~$100)[Front and Rear, Contact gen5diy1@gmail.com]
Tune (Depends but mine is $650)
3D Printed Headers(Depends if the chinese company deliver promised metal piece $600)

Total: ~$6,000

Which is actually cheaper than the procharger by $1000, so that is a win