[1JEWLDSSRS]

My suggestion is to just start it up, it's not like you aren't going to have oil pressure. You will have oil pressure as soon as the engine rotates. And also if you think about, yea the bulk of the oil will be drained back into the pan, but there is always a thin film coating all the parts in the engine that get oiled. Oil is designed to do that. Especially these new synthetics. Warm it up for a few minutes then take it for a drive to get all the engine components and trans up to temps. Enjoy. Oh and forgot to mention, what arizona posted will work if you feel the need. Throttle to the floor, held and clutch in will prevent any fuel from entering the engine via the injectors, they get momentarily shut down in that mode. My tech showed me that some time ago.