Quote:
Originally Posted by Ashen 6.2
making progress and looking good! The crank pin drilling is nerve racking for sure but is actually pretty easy. Just take your time and dont force things. Makes sure and use a good stop so you dont go too far.
|
Maybe you can help me with this... Torqstorm and ATI both mention putting high temp silicone on the keyhole of the ATI balancer since I am using crank pins and not a keyway. Do I just cover the hole with a little silicone and install the bolt or do I need to like get it down inside the keyway hole? Seems trivial, but I don't want a leak if I can avoid it.