[morepowerjoe]

Well I still have the darn oil leak. Looks like it could be possibly coming from the valley cover again around the oil pressure sensor. So I got some engine oil dye and a blue light so we'll see how that goes. I did already purchase a billet valley cover from ICT because I believe mine is bent on the corner or somethings not right there. The only thing I don't like about it is it doesn't have the afm block off holes machined into it so for the seals. I bought the rivet gun for installing the rivets into the block to block off the oil passages for the afm crap. The only thing I'm concerned with is whether or not the rivet gun will fit under the cowl to the block allowing me to get to those two oil passages in the back. Hopefully it goes smooth.