Quote:
Originally Posted by ZMEnow
Unless you are replacing the shifter with something else, why are you removing it. You only need to unlatch the shifter link clips to release the linkage rods from the trans. They just stay in place when you lower the trans. Same in reverse you just raise the trans and reconnect the clips. There is no reason to touch anything inside the car, especially the shifter knob. Hope it works out for you..
By the way with the cradle lowered and the trans crossmember still connected, you didn’t buy anything. Once you remove the crossmember you would have had easy access to the linkage clips..
|
Yep, I see that now.
Trans is out and clutch is mounted
Thanks for the help