Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

1JEWLDSSRS · 11-04-2023, 04:50 PM

As mentioned above, I would check with Andrew again for the parts you need. He is the guru on here for nice stout engine builds! He will do you right. I have a TSP Stage 3 cam listed in my sig with stock heads, except for the springs, trunnions and push rods, locks and retainers, and an LOD manifold on an L99 engine and made 486rwhp, so you could get real close to 500.

11-04-2023, 04:50 PM	#4
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 14,034	As mentioned above, I would check with Andrew again for the parts you need. He is the guru on here for nice stout engine builds! He will do you right. I have a TSP Stage 3 cam listed in my sig with stock heads, except for the springs, trunnions and push rods, locks and retainers, and an LOD manifold on an L99 engine and made 486rwhp, so you could get real close to 500. __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.