[Crazych66]

Hello! OK I think I'm about 99% there for the parts for the LSA build on my LS3. Going with a 6-rib setup.

Is there anything obvious I'm missing besides:
Crank-pin set
Snout plug

ZL1 Lid, gasket, bolts, clips
Bosch intercooler pump
3 bar map sensor part no 12592525
ZL1 oem fuel rails
ZL1 oem heat exchanger
New eaton isolator for LSA supercharger
LSA supercharger, gaskets, and bolts
FIC 850cc injectors
Chevy SS/ZL1 Fuel Pump
ADM FPCM
NGK Iridium IX Spark Plugs TR7IX # 3690
Intercooler pump harness and brackets
Throttle Body Harness extension
IAT / Maf Breakout Harness
Map Extension harness
Adm Belt Drive System with Tensioner and Idlers (Uses 6 rib serpentine drive system)
6rib belt for 3" pulley
LSA Evap line
Evap Ext harness
LSA ZL1 fuel feed line
ADM Reservoir and bracket
Strut Tower Spacers
IAT 2 Sensor
IAT / Maf Breakout Harness
Map Extension harness
Heater Hose relocation kit
LSA Evap solenoid
Evap Ext harness
ZL1 Brake booster hose
GM Part number 92229653-ZL1 Air Cleaner Outlet Duct for Vararam DRX