Quote:
Originally Posted by bsn
Metric is pretty standard as far as pitch if you thinks its an 8 get 6 and 10 also and you should be good as far as size. You want it solidly mounted at 4 points zip ties won't cut it, fabricate some brackets you want zero movement. Same goes for your hoses don't give them the opportunity to rub against anything. Braided steel lines will either fail or fail what they are rubbing against if allowed to rub-any covering will only delay the inevitable if you have a rub. Also if your running a larger oil cooler some type of thermostatic control is needed-too cold of oil is almost as bad as too hot of oil.
|
I recently got like 4’ ft worth of titanium heat resistant, 1” ID “shielding”. It’s the same “hairy” woven material that most people use for their spark plug wire heat/high temp resistant boots/socks.
I don’t think there’s gonna be any issue with heat; and although I feel like the woven titanium fabric will hold up for a “good while”, idk what to expect in the long run (3-4+ years)?