Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - Will 1-1.25” drop lowering springs require more for jacking/lifting the car up?

1JEWLDSSRS · 04-02-2024, 05:44 PM

My Camaro is lowered 1.25 on Pfadt springs, jacking her up from the sides is no issue with a low profile jack, I also have the ZL1 Addon jacking blocks on the frame rails. If I need to work under the front of the Camaro, I have to jack her up from the sides and install jack stands one side at a time because I have the Z28 front splitter which sticks out pretty far, and there is no way a jack will fit under it! At my shop, my tech has to use some small vette ramps to get his lift arms on the post lift under the car to lift it up. lol.

04-02-2024, 05:44 PM	#9
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 14,034	My Camaro is lowered 1.25 on Pfadt springs, jacking her up from the sides is no issue with a low profile jack, I also have the ZL1 Addon jacking blocks on the frame rails. If I need to work under the front of the Camaro, I have to jack her up from the sides and install jack stands one side at a time because I have the Z28 front splitter which sticks out pretty far, and there is no way a jack will fit under it! At my shop, my tech has to use some small vette ramps to get his lift arms on the post lift under the car to lift it up. lol. __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.