Quote:
Originally Posted by CamaroCracka
I don't run a shield on my heater lines and the passenger side header even burnt the foam off the aluminum line. I do tuck a lot behind the heat shield that runs up from the trans tunnel and covers the inner fender.
|
Thanks for the info. I am going to move forward with how I plan to route the wiring and will wrap it. I may have to come up with some additional shielding.
Quote:
Originally Posted by CamaroDreams76
I tried taking a picture of the area in reference but the headers, strut bar and big phone are hard to capture a clear image.
Yours is much lower but here's what mine looks like
|
It's a tough area to get a picture of. It helps!
