It did have a failure, started it up and just sounded like it was down a cylinder. Gave it a little.throttle and blue smoke out of the drivers exhaust. Did a compression check on driver side and cylinder 1 was down. So now I need a rebuild...
The motor is supposed to be a 415 forged stroker, I have no documentation on that though. And when I had it returned it only.made 570 rwhp at 8psi which seemed to be more on par with a cam only motor. So now I don't know if the motor is stock with a cam...forged....or stroked. If its stroked then im assuming there was already some damage that happened.
So as far as a stock rebuild or upgrades, it really depends on what is already inside of the motor.
|