Quote:
Originally Posted by cc-rider
That long run of your belt on the bottom off that video looks like it’s a little sloppy and flapping around. Is it slapping against something down there? You may need more tension. These belts stretch more than you’d believe under high rpm and load. Go see some videos of that on YouTube. Kind of amazing how far they can balloon out. My guess is that your belt is contacting something under high rpm/load and stretch and it’s shredding it up.
I put a JRE Supertensioner on mine and it’s a nice piece.
|
I agree with cc on this one. That bottom of the belt is slopping all over the place, and if you look at it you can see that it is also walking side to side a little bit. I'm guessing when you run it up the belt is hitting on the back side of it from the SC to the tensioner pulley, or possibly in another area. One of my friends that had a 2011 vette grandsport had a crank pulley start separating since they were a 2 pc unit, and his belt was walking around side to side like that. But I'm not sure what kind of crank pulley you have on there. Just another thought. I hope you get it resolved.
