[1JEWLDSSRS]

Originally Posted by King Nothing

Check out post 14
https://www.corvetteforum.com/forums...ammed-ls3.html

You might need to go back to 7.4 push rods. I would recommend not running that engine until you figure this out. Have you asked your tuner what they think?

I was thinking the same thing here, and what acutron said, most of the guys using a stage 2 or 3 cams like I'm running are running the 7.400 pushrods. I have the TSP Stage 3 in mine. Always good to use a length checker to get it correct. I could see using a longer pushrod if you were using the shorter Johnson or linkbar lifters, as they from what I understand, are shorter then the normal LS7's.. Correct me if I'm wrong guys.