Quote:
Originally Posted by CamaroCracka
I got my Z28 setup from an SCCA racer who helped develop the DSSVs on the Gen5 with GM and GM had him move the mounts on the front shocks down 1 inch and only a half in inch in the back. He said the half inch of rake was to decrease the understeer. I believe the ZL1 springs lower the rear less than the front too, but only by about a quarter inch.
Justice Pete recommended a +5mm difference between the front bar and the rear bar to address understeer.
The 1LE has the same springs as the SS, so I think you have the right idea with changing springs.
|
1LE bars are 27mm front and 32mm rear from GM.
The DSE rear bar is 35mm.