Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

scott71law · 04-04-2026, 01:17 PM

Hi all I just had wheels put on the car and when I did the relearn procedure for the pressure monitors everything seemed to work fine but now the pressures are all in the 40’s on the dash- the tires were inflated to 34 when I had them mounted. I’m hoping I didn’t get bad sensors, they came as a set of four (and were not cheap) but it seems odd all four tires are 43-44 psi according to these monitors now.

The procedure is pretty straight forward hard to screw it up but is there some other trick to this I might have missed lol?

I got the tool and with key on engine off pointed it at the valve stems on each tire in the order it listed in the owners manual and the horn went off for each one as it was supposed to and beeped twice when I was done. Tire pressure warning was off when I started it again but the pressures were reading way higher.

Thanks for any info.

04-04-2026, 01:17 PM	#1
scott71law Drives: 2011 LS auto Join Date: Sep 2020 Location: Albany NY Posts: 45	TPMS question Hi all I just had wheels put on the car and when I did the relearn procedure for the pressure monitors everything seemed to work fine but now the pressures are all in the 40’s on the dash- the tires were inflated to 34 when I had them mounted. I’m hoping I didn’t get bad sensors, they came as a set of four (and were not cheap) but it seems odd all four tires are 43-44 psi according to these monitors now. The procedure is pretty straight forward hard to screw it up but is there some other trick to this I might have missed lol? I got the tool and with key on engine off pointed it at the valve stems on each tire in the order it listed in the owners manual and the horn went off for each one as it was supposed to and beeped twice when I was done. Tire pressure warning was off when I started it again but the pressures were reading way higher. Thanks for any info.