i did a 2nd inspection from front to midcar.
theres no sign of melted garbage plastic on the exhaust bottom
the smell is not out of the exhaust
im hoping it was melted plastic chunks falling on exhaust from top
Quote:
Originally Posted by Ck1984
my 2015 2LT has been doin this a couple weeks.
i inspected underneathe car . didnt see any melted wires, or anything on exhaust
BUT under the hood , i did notice a 4 inch section of wire mold on drivers side injector harness was completely missing and about another 4inches crumbled in my hands when i manipulated it.
i ended up replacing about 15 inches of that wire mold and then put some larger wire mold over that and taped it up.
SO maybe bits of that plastic keep floating around and burning on exhaust?
i will need to do another underneath inspection to verify
|