|
The owner posted this on another website.
Its a 468ci LSX with a CFN direct port jetted to 300shot. We have a FJO progressive controller bring in the shot slowly not to blow the drag radials off. We have some suspension and transmissions changes to make over the hoilday, and then back to the track to try to get a single digit pass. We are making just over 800 to the wheels right now, we might be going after a few more HP also.
Build;
LSX 468ci
Warhawk LS7x heads
Fast 102R intake
American Racing Headers 2" and x Pipe
Custom Cat back Borla mufflers
ARD 4l80E conversion (one piece driveshaft)
Hendrix Engineering Axles
Welded up rear end (thanks Brian aka Madman)
Cold Fusion Nitrous Direct port and Fuel system
The car is heavy we have not changed anything to lighten it, stock front wheels, brakes, suspension etc. Rollcage, drive shaft safey loop, iron block, etc. legal to 10.0's. Our goal is to go nines on drag radials at full weight. this off of tech, his mods.
__________________
2010 SS/RS SIM
First to run 11's (11.83)on a stock long block.
First to run 11's cam only
First to run 11's all motor
First to run 10's (10.96) and did it with a 100% bonestock long block and a power adder (nitrous)
First to run 10's (10.55) on motor in 2010 Camaro
First to break into the 5's (5.97) 1/8th mile
First to cut a 1.5X sixty foot
First to cut a 1.4x sixty foot
First to car to cut a 1.3x 60ft
|