Hi guys,
We did a little update to our local customer's 2010 6spd manual Camaro last week and added some of our ported and milled LS3 cylinder heads and FAST 102mm intake manifold. Now we have not ported the intake yet, and he is still using a stock 90mm throttle body for the time being. The results on both HP and TQ were very nice.
Just as a recap, the runs you are looking at above include:
- LG Long Tube headers
- 100mm Cold air induction
- G6X3 cam kit
- LG ported LS3 heads (530hp run)
- FAST 102mm intake manifold (530hp run)
Once that was finished we added a 150 HP nitrous shot. Pulls below show nitrous before and after the heads and intake manifold. Sorry for the signal loss between 4000 and 4500 RPM.
For those of you keeping track here is the above dyno also with the curve of the car with bolt on's only (LG 1 7/8" headers, 100mm Cold Air, MagnaFlow mufflers and tune).
A little bit of porting work to the intake and addition of a larger throttle body should see even more gains!!
Anthony
LG Motorsports
972-429-1963
anthony@lgmotorsports.com