|
Roger that. I went out to Petsmart today and picked up 3 of the 3/16th's 40" tubes. I then went to Home Depot for a soldering kit and 20' of clear flex tube. Going to need that for the white El Wire I'm going to install.
Rick...basically, you connect the plug into the pre-existing jack to the car. On that plug, you run it to the power source for the lights. From the power source, you add in the splitters for however many lights you are going to run, correct? And from there, you just solder in the wires? So, you could actually end up running multiple strands (depending on length) from one 4-8ft source? You could potentially run up to 8 strands off the source up to a foot in length?
|