Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

Blue70SS · 01-19-2010, 11:00 PM

REAR SUSPENSION TORQUE SPECS as of 7/26/09 (found in suspension threads from DMS)
COMPONENT TORQUE SI documents 1st 2nd 2201676
4 Strut Mount to Body Bolts 43lbft 2198520
Strut to Strut Mount Nut 33lbft 2201630
Strut to lower Control Arm 59lbft 120 degrees 2196808
Lower Control Arm Inner Bushing at Adjuster 85LBFT 2198520
Lower Control Arm at Knuckle Assembly 30lbft 120 degrees 2198520
Upper Control Arm Rear Bolt to Bushing 37lbft 120 degrees 2201388
Upper Control Arm Rear Bushing Bracket Bolts 59lbft 120 degrees 2201388
Upper Control Arm Pivot Joint 59lbft 120 degrees 2198520
Upper Control Arm to Knuckle Assembly 44LBFT 90 degrees 2198520
Toe Link inner to Subframe Adjuster 85LBFT 2196934
Toe Link to Knuckle Assembly Bolt 103 lbft 2196934
Trailing Arm to Subframe Assembly (Inner) 74lbft 2197112
Trailing Arm to Knuckle Asembly 30lbft 120 degrees 2197112
Front Cradle(Subframe) Bolts to Body 74lbft 120 degrees 2198520
Rear Cradle (Subframe) Bolts to Body 74lbft 120 degrees 2198520
Front Differential Bushings 59lbft 2213853
Rear Differential bushings 59lbft 2213853
Driveshaft to Differential 85LBFT 2198520
Caliper Bracket to Knuckle Assembly (L99, LS3) 30lbft 90 degrees 2210668
Caliper Bracket to Knuckle Assembly (LLT) 30lbft 90 degrees 2210668
Rear Sway Bar End link Nuts 36lbft 2196718
Sway bar Bushing Bracket bolts 16lbft 2196709
Nut for CV shaft to Knuckle...... 199lbft/270nm (per 2 different Chevy dealers 1/21/10)
...One dealer said just use air tool and "hammer it on", other one stated their manual shows it a one use nut (end is crimped). Won't matter in my case - shafts being replaced at LPE and will get new nut.

01-19-2010, 11:00 PM	#2
Blue70SS Drives: 10 LS3 2SSRS IOM,21 ZLE Wild Cherry Join Date: Aug 2009 Location: Denver Posts: 2,126	REAR SUSPENSION TORQUE SPECS as of 7/26/09 (found in suspension threads from DMS) COMPONENT TORQUE SI documents 1st 2nd 2201676 4 Strut Mount to Body Bolts 43lbft 2198520 Strut to Strut Mount Nut 33lbft 2201630 Strut to lower Control Arm 59lbft 120 degrees 2196808 Lower Control Arm Inner Bushing at Adjuster 85LBFT 2198520 Lower Control Arm at Knuckle Assembly 30lbft 120 degrees 2198520 Upper Control Arm Rear Bolt to Bushing 37lbft 120 degrees 2201388 Upper Control Arm Rear Bushing Bracket Bolts 59lbft 120 degrees 2201388 Upper Control Arm Pivot Joint 59lbft 120 degrees 2198520 Upper Control Arm to Knuckle Assembly 44LBFT 90 degrees 2198520 Toe Link inner to Subframe Adjuster 85LBFT 2196934 Toe Link to Knuckle Assembly Bolt 103 lbft 2196934 Trailing Arm to Subframe Assembly (Inner) 74lbft 2197112 Trailing Arm to Knuckle Asembly 30lbft 120 degrees 2197112 Front Cradle(Subframe) Bolts to Body 74lbft 120 degrees 2198520 Rear Cradle (Subframe) Bolts to Body 74lbft 120 degrees 2198520 Front Differential Bushings 59lbft 2213853 Rear Differential bushings 59lbft 2213853 Driveshaft to Differential 85LBFT 2198520 Caliper Bracket to Knuckle Assembly (L99, LS3) 30lbft 90 degrees 2210668 Caliper Bracket to Knuckle Assembly (LLT) 30lbft 90 degrees 2210668 Rear Sway Bar End link Nuts 36lbft 2196718 Sway bar Bushing Bracket bolts 16lbft 2196709 Nut for CV shaft to Knuckle...... 199lbft/270nm (per 2 different Chevy dealers 1/21/10) ...One dealer said just use air tool and "hammer it on", other one stated their manual shows it a one use nut (end is crimped). Won't matter in my case - shafts being replaced at LPE and will get new nut. __________________ LPE 650+,IOM Pearl White Rallys 860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit LPE Brotherhood . Last edited by Blue70SS; 02-07-2010 at 03:29 PM.