Quote:
Originally Posted by mtcwby
I don't see the tool you used working on the Camaro. The diff bushings are in a steel cup, with a flange that interferes with your tool.
If you are so convinced that your tool works so well on the Camaro, send me one of the tools to test. If it works I'll definitely give you a super write up.
Even with the tool, no way it's only one hour. Takes half that long just to get the car up on stands and properly supported.
|
First of all, I do not have to prove it to any of you. We have done it many times. I only mentioned it because of the 8 hours The tool is used for the Camaro and G8. The Camaro might take about 5 minutes longer because of the flange has to be moved. But that is it. These tools are not mass produced and are custom made. We make no money on them so we do not want to sell them to everyone.
I am in travel mode the next 2 weeks. I have a Justice Package and a Track system to do on 2 Camaros locally. I will be taking a million pictures and documenting the builds. And from these pictures, will make or update a ton of install manual. I will be glad to post and do first the rear diff mount bushings, first so all of you that said it cannot work can be done or impossible can see how Pedders gets things done in an efficient manner.
mike
dms
mike
dms