Quote:
Originally Posted by FwyFlyer
I used a 2 part epoxy paste (marine) to fill my cross flags after removing the posts with my Dremel. The paste is like a putty and remains workable for 30 minutes, so I had plenty of time to fill and level both pieces. After it cured I shot the paste side with "Bulldog" paint adhesive so the 3M mounting tape stuck real well.
|
okay cool, I'll look into that. I bought some molding tape at Pep Boys, wasn't 3m, but seemed like the right stuff for the job and I think it'll be okay. I looked for 3m but they didn't have any.
I got the V Flags from the '60s camaros...did you cut the 3m tape in small pieces and cover the whole back? or just put a couple strips on the back?