Quote:
Originally Posted by RickyTheStorm
I just got a quote to have a cam put in. $1600 just for labor, not the cam, gaskets, fluids etc. Does this seem high? If I had a engine hoist I'd do it myself, but in the end it would be cheaper to buy one and still do it myself.
Also quoted $800 to put in a torque converter that I know I can do myself in a couple hours. $800 is without the actual converter or fluid.
|
No need for a hoist. You can do everything with the engine in. You should be able to find a cam/spring package in the 600-700 range depending on what you get. If you do it yourself go ahead and do the pushrods, and trunion upgrade for the rockers.