Thread: Camber Kit?
View Single Post
Old 02-02-2010, 12:47 PM   #12
robertway

 
robertway's Avatar
 
Drives: 2012 Challenger SRT8 Auto
Join Date: Sep 2009
Location: Central New Jersey
Posts: 839
Quote:
Originally Posted by dms View Post
What I am saying is that with a drop of 1 inch or greater, the lease amount of negative camber that I could adjust to is -1.0 degrees. I could increase negative camber, but with drop coils only that would increase understeer

mike
dms
OK, you're probably gonna get a little pissed now but I am thick today, it is Monday after all, and our semantics of less/more/negative/positive may be a disconnect here... tolerate me here for a minute.

Based on what you lay out here I read it as saying that with a 1" drop or more I would not be able to get the car into the -0.9 to -0.7 range and pretty much nowhere near the -0.4 GM spec (I believe it is -0.4 with a .75+/-)

Thanks again...
__________________

"When the people find they can vote themselves money, that will herald the end of the republic." - Benjamin Franklin




LS3 Camshaft Swap Do-It-Yourself Instructions - 2010 LS3 gone but not forgotten!!!
robertway is offline   Reply With Quote