Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

WICKEDSS · 02-03-2010, 03:40 PM

Install the remaining NEW engine flywheel bolts.
• Tighten the NEW engine flywheel bolts to 30 N·m (22 lb ft).

• Tighten the NEW engine flywheel bolts an additional 45 degrees using the J 45059 meter

And yes that is correct.......Install the transmission mounting bolts and tighten to 50 N·m (37 lb ft).

02-03-2010, 03:40 PM	#7
WICKEDSS Dan Drives: THE BEAST Join Date: Sep 2009 Location: ODESSA,TX Posts: 336	Install the remaining NEW engine flywheel bolts. • Tighten the NEW engine flywheel bolts to 30 N·m (22 lb ft). • Tighten the NEW engine flywheel bolts an additional 45 degrees using the J 45059 meter And yes that is correct.......Install the transmission mounting bolts and tighten to 50 N·m (37 lb ft).