Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

gearhead440 · 02-06-2010, 12:59 PM

Thanks for the input. I was thinking the same thing about lift but all the reading I have done says to change out the springs because of the increased duration of the hot cam. There isnt a lot of difference in the price with or without the springs so that is favorable. Hot Rod recommends the 918 comp springs for any cam above stock and they are about the same price as the GM springs. If I can get the dealership to install the GMPP kit, I'll go that route. Thanks again.

02-06-2010, 12:59 PM	#3
gearhead440 Drives: Yellow 2SS, 6 speed manual Join Date: Jan 2010 Location: Concord, NC Posts: 218	Thanks for the input. I was thinking the same thing about lift but all the reading I have done says to change out the springs because of the increased duration of the hot cam. There isnt a lot of difference in the price with or without the springs so that is favorable. Hot Rod recommends the 918 comp springs for any cam above stock and they are about the same price as the GM springs. If I can get the dealership to install the GMPP kit, I'll go that route. Thanks again.