Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

HaZe_X · 02-12-2010, 05:23 PM

I used the Blendmount mount for the V1 radar, its the only one I found that fits the mirror stem on the Camaro. Also I used the invisicord, but I had to file down the pins so they fit in the mirror power (did not use invisicord system due to running a concealed display, just used the pins. I also used a concealed display and mounted it by the 4pack gauges (slim model will only work) Also have a remote mute wire by the turn signal stalk (forgot to take a picture)

^thought that was a cool picture overall..

Its completly PnP, no wire splicing at all, you can revert back to stock in under 10 min.

Sorry the inside a little dusty due to not being driven in the winter.

02-12-2010, 05:23 PM	#1
HaZe_X Drives: Trailblazer SS & Camaro SS Join Date: Nov 2009 Location: North Jersey Posts: 758	My Valentine 1 Install I used the Blendmount mount for the V1 radar, its the only one I found that fits the mirror stem on the Camaro. Also I used the invisicord, but I had to file down the pins so they fit in the mirror power (did not use invisicord system due to running a concealed display, just used the pins. I also used a concealed display and mounted it by the 4pack gauges (slim model will only work) Also have a remote mute wire by the turn signal stalk (forgot to take a picture) ^thought that was a cool picture overall.. Its completly PnP, no wire splicing at all, you can revert back to stock in under 10 min. Sorry the inside a little dusty due to not being driven in the winter.