Quote:
Originally Posted by Shadey
OK so I'm a little confused and wanted to get clarification before starting if possible. Asked PC via e-mail what the difference was between the PC 7346SP and 7424XP and answer was:
"This is the same unit, however the 7424XP comes with a polishing pad only. The 7346SP includes both a sanding pad and polishing pad. The 7346sp also includes a heavier duty counterweight which will accommodate the sanding pad."
So my confusion boils down to pad size, counterweight size, and some info. in Junkman's videos. The adhesive backing plate that came with the PC 7346SP is a 6" pad and it is the exact same size as the Backing plate I purchased with the Orange, White, and Black Adam's pads (actually measured the backing plates are 5 7/8"). The counterweight on the PC is a 6" counterweight. Is this the counterweight I need to be using or do I need to get the 5" counterweight? Junkman's video says use the 5" weight with 5" pads and 6" weight with 6" pads. Did Adam's pad size change because they seem to fit the 6" backing plate perfect?
|
We're gunna need AJ to chime in here. He's the PC expert.