Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

adub · 03-10-2010, 09:32 AM

Car is 2SS RS Auto with 300 miles on it. Cruising down the highway yesterday and the stabilitrak lights start flashing, info center says service stabilitrak soon. Car is running fine, so I stayed on the highway for another 2 miles or so until my exit came up. Once I slowed down at the exit, the car freaked out, began to idle rough, chug, and lurch. Pulled into parking lot. Tried turning it off/on, and drove around the parking lot. Lights went away, but it wasn't running good. Got back on highway and headed to dealer. Stabilitrak message went on and off again then CEL came on. Dealer pulled a bunch of codes (one was engine misfire, dont know the others) and showed me a TSB. The car was behaving as described per TSB. The TSB said the issue was related to a damaged wiring harness on the pass side hitting the exhaust manifold. My cars harness is well clear of the manifold. Dealer found no issues, clear codes, and sent me on my way. Anyone else had a similar experience?

03-10-2010, 09:32 AM	#1
adub Drives: Shopping Join Date: Feb 2010 Location: Houston Posts: 145	Stabilitrak Freakout Car is 2SS RS Auto with 300 miles on it. Cruising down the highway yesterday and the stabilitrak lights start flashing, info center says service stabilitrak soon. Car is running fine, so I stayed on the highway for another 2 miles or so until my exit came up. Once I slowed down at the exit, the car freaked out, began to idle rough, chug, and lurch. Pulled into parking lot. Tried turning it off/on, and drove around the parking lot. Lights went away, but it wasn't running good. Got back on highway and headed to dealer. Stabilitrak message went on and off again then CEL came on. Dealer pulled a bunch of codes (one was engine misfire, dont know the others) and showed me a TSB. The car was behaving as described per TSB. The TSB said the issue was related to a damaged wiring harness on the pass side hitting the exhaust manifold. My cars harness is well clear of the manifold. Dealer found no issues, clear codes, and sent me on my way. Anyone else had a similar experience?