Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

Don O · 03-17-2010, 10:49 PM

Quite simple. The third picture shows it all. The LEDS I got at Pep Boys, I have one pointing about 45 degrees into the front opening and the other about 45 degrees into the rear opening. You have to drill a small hole (1/8") to get the wires under the console. I connected the wires to the power outlet red and black wires in the front of the consoles using T-taps. I used the 3M emblem tape to hold the billet piece down. You can get the 3M tape on eBay too.

The credit for this goes to BMWDON for the cool idea.

Don O

03-17-2010, 10:49 PM	#12
Don O Camaro and Vettehead Drives: 2SS/RS IOM L99 69 427/400 Vette Join Date: Aug 2009 Location: 12 miles East of Disneyland - Anaheim Hills Posts: 547 View My Garage	Quite simple. The third picture shows it all. The LEDS I got at Pep Boys, I have one pointing about 45 degrees into the front opening and the other about 45 degrees into the rear opening. You have to drill a small hole (1/8") to get the wires under the console. I connected the wires to the power outlet red and black wires in the front of the consoles using T-taps. I used the 3M emblem tape to hold the billet piece down. You can get the 3M tape on eBay too. The credit for this goes to BMWDON for the cool idea. Don O Attached Images __________________ Nothing sucks more than that moment during an argument when you realize you're wrong.