|
Take it to the dealer and have them check if this applies per the service items in the GMVIS. They spec'd tighter fitting leather on the seats so there will be a production date when they speak to the engineer.
Service Information
2010 Chevrolet Camaro | Camaro (VIN F) Service Manual | Preliminary Information | Document ID: 2382270
--------------------------------------------------------------------------------
#PIE0039: EI09313 - Engineering Information - Seat Material Warped, Wrinkled, Wavy, Bunching or Damaged - (Jan 13, 2010)
Subject: EI09313 - Engineering Information - Seat Material Warped, Wrinkled, Wavy, Bunching or Damaged
Models: 2010 Chevrolet Camaro
Attention: Proceed with this PI ONLY if the customer has commented about this concern AND the EI number is listed in GMVIS. If the customer has not commented about this condition or the EI does not show in GMVIS, disregard the PI and proceed with diagnostics found in published service information. THIS IS NOT A RECALL -- refer to Service Bulletin 04-00-89-053C for more details on the use of Engineering Information PIs.
--------------------------------------------------------------------------------
Condition
Important: If the customer did not bring their vehicle in for this concern, DO NOT proceed with this PI.
Some customers may comment that the appearance of their seat trim or upholstery is warped, wrinkled, wavy, bunching or damaged. This condition may occur on the front or rear seats and applies to both leather and cloth materials.
Cause
GM Engineering is attempting to determine the root cause of the seat material condition. Engineering has a need to gather information on vehicles that may exhibit this condition, PRIOR to repair. As a result, this information will be used to "root cause" the customer's concern and develop/validate a field fix
Instructions
If a vehicle is encountered with the above condition, please contact one of the engineers listed below.
Contact information
Engineer
Phone Number
If an engineer is unable to take your call, please leave the information listed below in a message.
• Technician name
• Dealer name and phone number
• Complete VIN and repair order (R.O.) number
On the repair order, document the date and time the call was placed.
If engineering is unable to return the call within one hour, proceed with diagnosis and repair based on information found in SI.
Warranty Information
If engineer was contacted or required information was provided, use:
Labor Operation
Description
Labor Time
C9922*
Engineering Information - Seat Material
0.2 hr
* This is a unique labor operation number for PI use only. It will not be published in the Labor Time Guide.
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information.
WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION
© 2010 General Motors. All rights reserved.
|