[herkman]

I posted this advice on the rocker removal and another forum member said he used my method and it worked. It may not be the standard way but works;
(1) Remove front and rear screws from rocker in fenderwells
(2) With pressure, pull the rear of the rocker outward to release the four or so clips.
(3) Do the same at the front using a slight downward motion (they are angled).
(4) Now tap and slide the rocker rearward (may need a rubber mallet)
the clips are in channels on the rockers and will remain in the car body
(5) using needle nose pliers, squeeze the arrow shaped pins of the clips in to pull them from the body
(6) slide them back into the channels on the rockers for safe keeping

Hope this helps