Quote:
Originally Posted by Moose
Welcome 
I've seen the 3M clear bra installed on a Firehawk, and it looked good. Granted, this car did not have stripes.
If you choose to get one, I'd recommend you give your car a good bath as well as clay the paint. I'd follow up with a good wax/polish, but, I WOULD NOT apply any wax/polish to the area to be covered with the clear bra. 
Washing/claying will prepare the surface for the bra to be applied, but you don't want anything else applied which may hinder the application.
Good luck
Ed |
Moose is our car care Guru! Go with this!
