[jlopez]

Ok, to raise the passenger seat, this is what I did. I took the seat all the way out. There is one electric connector to undo, this is kind of tricky, but there is a Plastic part that slides towards the door opening to unlock the connector, you slide this back in to re-lock the connector. The seat is held on to the seat rails by six torx bolts and nuts, I took these off, replaced them with six 50mm long bolts (8mm diameter) and reused the original nuts. For spacers I used six 3/8”-16x1-1/8 rod coupling nuts, the 8mm bolt fits right through these perfectly. This raised the entire seat by 11/8 inch. My wife is 5 feet 2 inches tall, she said this makes a big difference, and she is happy now !!!