|
Ok It looks as though GM has a problem with these clutches. I had 2700 miles on my 2SS and the clutch stuck 3 inches from the floor and had the garage stunck up all day. Took it to the dealer they put on a new flywheel pressure plate and all the little bolts and glue. Seemed to be fine and at 4900 miles it stuck again. Took it in today had the heater core noise fixed they looked at the slaive cylinder and it was not leaking. No bullitens on the clutch so basically nothing they are going to do right now. Well my master/clutch cylinder cap is leaking and there is a bulliten for that so that got ordered. When I wash the car I get way more brake dust coming from the back brakes than I do the front. Which they had no answer for. I tried telling him the cap caused the clutch to stick cause if its leaking out its sucking air and dirt in. Has anyone had there cap leaking? I think we have a problem with the same resevoir and the lines getting to hot next to the exhaust. I know its not driver error. Tried getting it to stick before I took it in today on the road to the dealer tried 3 hard takoffs and let the clutch out slower each time and nothing. Even revered her up to 3500-4000 rpms and let it fly. Those of you who just got a new clutch hate to be the bearer of bad news Sorry. I did not get the new part number though that they are using now maybe the only good thing for ya.
|