|
You may be using too much product. One ounce should easily do a camaro...from Zaino:
A little goes a long way. We've engineered Z-2 PRO™ to be extremely efficient. While applying Z-2 PRO™, do your best to apply very thin, even layers. As you become more familiar with the product, a single eight-ounce bottle will do a Corvette 20 times. Remember - when in doubt, use less. If your car's surface isn't in optimal condition, take the necessary steps to correct any imperfections before applying Z-2 PRO. For best results, always precede an application of Z-2 PRO™ with a Z-7 Show Car Wash. This will ensure the surface is free of any contaminants or incompatible oils/deposits. Z-2 PRO™ contains no cleaners, and no abrasives, therefore the surface must be in good condition before you apply Z-2 PRO™.
For your initial application, enable Z-2 PRO™ by mixing with ZFX Flash Cure Accelerator as directed by the instructions included with ZFX Flash Cure Accelerator. It is critical that you use ZFX Flash Cure Accelerator with Z-2 PRO™ for the initial application, or if multiple layers are to be applied within a 24 hour time period.* Apply a thin coat of Z-2 PRO™ to your entire car using a 100% cotton cloth or applicator pad. Heavy rubbing is not necessary. Remember: Z-2 PRO is extremely concentrated. 1 oz of Z-2 PRO can do the average sized vehicle 1 to 2 times including the rims. Less is better. Use as little product as possible.
Allow Z-2 PRO™ to haze (this should take 10-15 minutes in normal conditions), then by using a clean, 100% cotton, made in the USA towel to buff off Z-2 PRO™ and reveal the hidden beauty of your paint.
NOTE: Z-2 PRO™ is extremely durable and should provide at least 6 months of protection for your vehicle. If your goals are maximum shine and maximum protection on everyday vehicles, we recommend 3-4 applications per year. For show car owners, multiple coats will provide the wettest-looking, deepest, most distortion-free finish you can imagine.
* Note regarding ZFX and Z-2 PRO™ : For a more dramatic appearance and improved durability, Z-2 PRO™ can be layered multiple times. We recommend no more than 3 layers be applied over a 24-hour time period. Whenever you layer Z-2 PRO™, you must activate it with ZFX. For additional information, refer to the ZFX Flash Cure Accelerator page.
|