[redvette24]

Originally Posted by belliott51

Doing my first HPDE in a couple of weeks at Gateway Raceway near St. Louis, MO. It' sponsored by the local BMW club. I'm looking for some tips on how tune the car. Its a stock 2SS 6M with exhaust. The car seems like it handles pretty good in normal driving, maybe pushing it a little on the on-ramps, but I really have no idea how this thing will do on a track with other cars around. Can I do anything to the tires, suspension, etc? I plan on changing the fluids and everything. Also, is there any other tools I should bring other than an air pressure gauge, inflator, jack/stands, torque wrench? I also plan on bringing extra oil, brake fluid, and antifreeze. Any tips would be greatfull. Especially on how to drive the thing into and out of the corners.

To respond to a few simple things first. As far as the suspension. You might want to consider better Shocks and Sway Bars. Possibly also lowering the car some. Adding an Extra Quart of Oil before you start an HPDE is also recommended. I blew up my motor at an HPDE and it is believed to be partially because of Oil Starvation. (and I always add a quart). Now I run an Accusump. BRAKE FLUID......I believe BLUE DOT 4/5. I think its 5. Bring a basic set of Tools, a Jack, a set of stands. And Extra Brake Pads and cheap Napa Rotors. Bring a Torque Wrench and Lug Nut Socket. You will want to check the Lugs before and after every session.

Thats just a start.