Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

KBRacing96 · 05-29-2010, 09:25 PM

Ok, So I don't have a Camaro, but this seems to be the best place to get info on the KB blowers, so I though I'd ask here. I have a 01 GMC truck with a forged 346 LS1 I'm putting a KB 2.8h on. I plan on running 15-18psi of boost. I was wanting to know if it would be better to spray meth pre-throttle body, or post blower? The truck kit has a nice 3/4 inch spacer on the blower outlet that would let me put the meth nozzle spraying right into the discharge of the blower but before it goes though the intercooler. My thinking is that's gonna be the hottest air, so it would do the most good there. Anyone have an opinion on this???

05-29-2010, 09:25 PM	#1
KBRacing96 Drives: 01 GMC 4x4 ecsb "Force Feed" ;~) Join Date: May 2010 Location: Wheatland, WY Posts: 8	Best place to spray Meth on a KB Ok, So I don't have a Camaro, but this seems to be the best place to get info on the KB blowers, so I though I'd ask here. I have a 01 GMC truck with a forged 346 LS1 I'm putting a KB 2.8h on. I plan on running 15-18psi of boost. I was wanting to know if it would be better to spray meth pre-throttle body, or post blower? The truck kit has a nice 3/4 inch spacer on the blower outlet that would let me put the meth nozzle spraying right into the discharge of the blower but before it goes though the intercooler. My thinking is that's gonna be the hottest air, so it would do the most good there. Anyone have an opinion on this???