[rdono]

We just completed a few mods on the Cavallino Camaro and wanted to share a how to which demonstrates how easy it is to build your own DRLs. We used the units from Lightwurkz as we have past experience with their products and have been very happy with the quality. I also like the fact that they can provide halos that are the correct sized for the lamp on the Camaro. The final product will be the brightest LEd halo on the market and it will fill the lamp, not sit off center. The total time to make these mods was about 4 hours not including removal of the lamps from the car. Tools needed are only a Dremel tool with cut-off blade, a air sander (DA in locked mode) and a solder gun.

If you do not access to a air sander a belt sander with fine grit paper will work or you can simply place paper on a flat surface and hand sand the parts.