Quote:
Originally Posted by Eric's Blue
After doing an internet search other GM vehicle owners seem to be filing the same complaint... after watching the paint segment of the Ultimate Factories Camaro, I noticed that they used electrically charged paint, primer etc. Is the body shop going to use electrically charged methods for painting?
|
No Eric, the process outside the factory is slightly different. Same steps but done without electricity. A primer over bare metal,base coat (color) and then the clear. The shop can use a plasticiser (flex agent) in both the primer and the clear to add some 'give' to the material and the thinking here is a flexible
surface will cushion the blow of the stone an lessen the chance of a chip.
