06-18-2010, 06:52 PM
|
#54
|
Drives: 2010 Camaro 2LT/RS ABM
Join Date: Sep 2009
Location: Sugar Land, TX
Posts: 13,075
|
Quote:
Originally Posted by Darth_Emma
When you press the reset button to put it in "relearn" mode, the car beeps twice. Then as you let the air out of each tire (starting with the front driver side tire), it will beep once when it has detected each sensor until you've set all 4 (going clockwise around the car). After the final tire is done, it beeps twice. Then it will indicate the pressure in all 4 wheels. Next, start driving and i about 15 minutes, the DIC will light up and tell you that you need to check your tire pressure system and the warning light will blink because it's lost it's settings. Ugh!
|
O...  i feel stupid now...lol i though all you had to do was press the relearn button and that was it. I didn't know you had to go out of the car and release air until it beeps for each tire...no wonder my TPMS hasn't gone mental yet...
__________________
2LT, RS, AT6 ABM, Gray Leather
Quote:
Originally Posted by baclarsen
Dude, you go through cars faster than I go through underware!!
|
1000 Initial Order 9/14/2009 - Classic Chevy Sugar Land
1100 Order accepted at dealer: 9/15/2009 - NPGV41.
2000 Order accepted by GM: 9/29/2009
3000 Accepted By Production Control: 9/30/2009 - TPW 10/26/09
3100 Sequenced:10/12/09
3300 Scheduled For Production:10/13/09
3400 Broadcast:10/22/09
3800 Produced:10/27/09
4000 Available To Ship:10/28/09
4200 Shipped:10/29/09
5000 Delivered To The Dealer:11/09/09
6000 Delivered To Customer:11/12/09
|
|
|