|
Dr. Jekel: glass is held on with double-sided sticky tape. The first day my glass was loose, I pushed it back into place and have had no other issues.
Klandry: I mounted the washer bag directly below where the blue CAI label is on the air box (see above pic) where the stock washer bottle normally resides. If you look at the washer bag kit photo, you'll see a couple of sheet metal screws and a bracket. I measured out where I wanted the bag to hang, drilled a couple of holes in the metal near the area where the stock air box duct originally was and screwed the bracket into place. I also tie-wrapped one of the loops of the washer bag to the car's wiring loom to ensure that it wasn't directly visible from the viewing glass and to help better hold it in place. I'll snap a couple of pics and post. Hope this helps.
|