View Single Post
Old 07-13-2010, 08:42 PM   #64

Speed74SS's Avatar
Drives: 2010 LPE 650+ CTS-V
Join Date: Oct 2008
Location: Sioux Falls, SD
Posts: 1,640
Originally Posted by My 5th View Post
Would there be a problem putting 10" wide wheels on all 4 corners, but having 275 tires on the front and 305 or 315 on the rear? Would the different tire sizes contribute to understeer alleged to occur with staggered wheel/tire sizes? In the alternative, with the 20" X 10" wheels on all four would running 305's all around cause problems up front? Secondly, would a car lowered with coilovers be affected any differently than a stock suspension?
It is ok to run 10" tires front and back. It is not recommended as far as the rim size and tires, as they are just outside the range for 10" rims for both 275's and 315's. However, this is the exact set up I am running with the Nitto NT05's and it works for me. My car is lowered about 1.5" also. I did buy these rims to run 285's all around but couldn't find any tires in that size that I wanted to run. I think you may run into rubbing issues running a 305 up front.
'10 CTS-V : LPE 650+ Package 587hp / 582tq

2.55 Upper / 8.6 Lower / ID850's / Kooks Longtubes / New Era CAI
Speed74SS is offline   Reply With Quote