View Single Post
Old 07-21-2010, 02:17 PM   #4
US Navy Vet
GearHeadPeter's Avatar
Drives: 2011 2LT/RS, 65 Mustang GT Fastback
Join Date: Oct 2009
Location: Gilbert, AZ
Posts: 1,568
Originally Posted by thespymaster View Post
Ok, I want this mod for the AAC side markers!!
Here is the pic of the AAC LED side marker and dual intensity wiring harness.

The second pic is of the dual intensity wiring harness installed in the LED side marker. The shrink tubing is 1/8".

The third, fourth, and fifth pics are the spot on the marker assy that I will drill to put the turn signal wire through.

The sixth pic is of the fully assembled LED side maker with turn signal wire through the marker. After you have pulled the red wire through the hole put a some clear silicone to prevent water intrusion.

The seventh pic is of the LED side marker with just the running light on. View the video to see what it looks like as it would blink.
Attached Images
2011 - 2LT/RS - RY, A6, Gray Interior - Team LLT:
3rd Camaro on this forum to have a Mylink installed. Installation by GEN5DIY, Heritage Grill, Lloyds Premium Ebony Camaro RS floor mats, Empire Billet Camaro Black sill plates, AAC: LED footwell & interior lighting, Rear Courtesy Lights, LED side markers/turn signals, Plasma P13W DRl bulbs, Formula 1 Pinnacle Series tint, Roto-Fab Yellow CAI & Fuse cover, Technostalgia Afterburner LED taillights, EmblemPros custom V6 hydrocoated carbon fiber/RY engine cover, Pfadt Sport sway bars, Ofer's Backup Camera, and full Brembo brake conversion.
GearHeadPeter is offline   Reply With Quote