Quote:
Originally Posted by kga10734
I'm thinking about going to a sheet metal place and see if they can fabricate a air box/ shield like the other CAI have. I want to use the Airaid tube and filter, but have a new air box made. Something along the lines of the Cold Air Inductions or the short ram Injen. Something with a top on it that screws into place, insulated sides, and opens into the wheel well for cold air. I like the Airaid intake, but if the air box is keeping it from performing the best it can, I plan on changing the air box to help it do the best job it can and look good at the same time.
|
Did you see the Roto fab post about the air temps? I think they were refering to the "trumpet" as being the inlet tube? And this was maybe bringing in some warm air with the cool air.I wonder if we just took off that tube and just extended the home made wall to cover that whole area like the other cai's and just let it work as the others do maybe that would help.That way we have a bigger box, and Rotofab said bigger is better for the air flow to the filter I think, and not alot of extra cost for us. I know Scrmmg mentioned on a stock box that tube worked well but still 5-7 degrees hotter then ambient. I think I will try to find a sheet of the automotive black plastic like I use pcs of for my wall I have now.
Also if tube was gone we wouldn't have to contour the walll, just a flat part to be attached.
